Garage Door – Operating equipment

OPERATING EQUIPMENT

Operating equipment to NASSAU Garage Door

Remote controller is a popular solution to Garage Doors as it gives higher comfort and the Garage Door can be activated wireless from a distance. NASSAU electrical operation offers flexibility between different operating units, as a Garage Door can receive signal from several remote controls. Each of our operating systems is using security technology which is 128-bit encrypted, it is the same security system used in bank sector. At the same time all NASSAU operating systems are using rolling codes which means that there is always a new code used to Garage Door every time you push radio receivers button. It makes it impossible to copy and decode the code. Radio receiver are resistant for interference and won’t be disturbed of any other wireless units around. Read more about other units in the section below. Our choice of radio receivers gives the possibility to adapt to customers individual needs for usage of gate. You order your radio receiver in our webshop.

2-Channel Standard Hand Remote Control

NASSAU 2-channel uni-directional hand transmitter can be programmed with different functions.  Hand transmitter can run 1 or 2 Garage Doors, turn on and switch off engine or open Garage Door a little to ventilate the garage. Hand transmitter button can be locked so unwanted activation will be avoided. We refer to our manual attached to our products, so you can read more detailed instructions. 

Specifications

  • Type: NR572
  • Channels: 2
  • Maximum number of garage doors serviced: 2
  • Size (B x H x D): 39 x 60 x 12 mm
  • Frequency: 868 MHz
  • Weight: 30 g
  • Communication method: Uni-directional
  • Temperature range: -20 C til +60 C
  • Battery type: CR 2032, 3V
  • Inc.: Battery
2-Channel Standard Hand Remote Control NR572

4-Channel Hand Transmitter

NASSAU 4- channel uni-directional hand transmitter can be programmed to operate up to 4 Garage Doors, turn on and switch off the engine or open the Garage Door whole or partial for ventilation. Hand transmitter button can be locked so unwanted activation will be avoided.  To read more please refer to our manual which is attached to our products, here you can read more detailed about programming. 

Specifications

  • Type: NR564
  • Channels: 4
  • Maximum number of garage doors serviced: 4
  • Size (B x H x D): 39 x 92 x 12 mm
  • Frequency: 868 MHz
  • Communication method: Uni-directional
  • Temperature range: -20 C til +60 C
  • Battery type: CR 2032, 3V
  • Inc.: Battery, sunshine clips, wall mount
4-Channel Hand Transmitter NR564

Mini-hand transmitter 3-channel with status button

NASSAU 3-channel bi-directional mini remote control can not only open or close  Garage Door, but it can give you indication about the Garage Door position in a given time. When your Garage Door is out off sign and you wish to control whether the Garage Door is closed. Just push status button on your bi-linked remote control and you will receive indication about if your Garage Door is open or closed.

Specifications

  • Type: NR633
  • Channels: 3
  • Maximum number of garage doors serviced: 3
  • Size (B x H x D): 48 x 48 x 13 mm
  • Frequency: 868 MHz
  • Weight: 30 g
  • Communication method: Bi-directional
  • Temperature range: -20 C til +60 C
  • Battery type: CR 2032, 3V
  • Inc.: Battery, sunshade clips, wall mount
mini canal electrical equipment package NR633

Wall transmitter 2-channel with status button

NASSAU 2-channel bi-directional wall transmitter with status button can run 1 or 2 Garage Doors. This b-linked wall transmitter is equipped with a status bottom which makes it possible to control your Garage Door position. This is the perfect solution if you wish to know whether your Garage Door is open while you are inside the house and have the Garage Door out of sign. It is possible to deactivate wall transmitter with a push-button blocking function which gives extra peace of mind e.g. when you are on holiday.

Specifications

  • Type: NR644
  • Channels: 2
  • Maximum number of garage doors serviced: 2
  • Size (B x H x D): 82 x 83 x 26 mm
  • Frequency: 868 MHz
  • Weight: 40 g
  • Communication method: Bi-directional
  • Temperature range: -20 C til +60 C
  • Battery type: CR 2032, 3V
  • Inc.: Battery, wall mount
Wall transmitter 2-channel with status button Package NR644

Code Keypad 3 Channel

NASSAU 3-channel uni-directional wireless code keypad can run op to 3 Garage Doors just by one 4-digit pin code. This code keypad gives you the possibility to give code to e.g. person which is delivering something to you while you are not at home – this code will be valid three times. Code keypad has a free function button which can be programmed after your choice, e.g. to turn on/off the motor. This code keypad is delivered with a protection against wind and weather.

Specifications

  • Type: NR526
  • Channels: 3
  • Maximum number of garage doors serviced: 3
  • Size closed (B x H x D): 81 x 118 x 35 mm
  • Size opened (B x H x D): 81 x 189 x 35 mm
  • Frequency: 868 MHz
  • Weight: 40 g
  • Communication method: Uni-directional
  • Temperature range: -20 C til +60 C
  • Battery type: AAA, 1,5V
  • Inc.: Battery, wall mount
Code Keypad 3 Channel NR526